Franklin, Tennessee homeowner thawing a frozen water line pipe with an electric hair dryer

How To Thaw A Frozen Pipe

If you are experiencing a frozen pipe emergency in Franklin, Tennessee, the first step is to shut off the water at the main shut-off valve. Once this has been done, it is vital to identify where the cold air is coming from and how best to thaw out the affected pipe. Pipes burst in extremely cold weather. It happens like this: we get a hard freeze for a day or two, then the weather warms up, causing the frozen pipe to expand, causing a burst pipe.

There Are Several Methods To Thaw Frozen Pipes

You can use several methods to thaw frozen pipes, such as a hair dryer, a heating pad, or pouring hot water over it. It is essential to be careful when applying heat so that the pipe doesn’t get damaged by high temperatures.

Following these steps and being careful as you thaw the frozen pipe can keep your plumbing system from getting any worse. With the right knowledge and preparation, you can quickly and safely thaw a frozen pipe in Franklin, Tennessee.

It’s Important To Use Caution When You Thaw Frozen Pipes

It is important to use caution when attempting any of these methods and understand how much heat is necessary for the size of the pipe. If in doubt, contact a local professional for assistance with thawing your frozen pipe.

Remember to always shut off the water at the main shut-off valve before attempting any thawing methods.*

If You Have Questions Regarding Thawing Pipes, Give Tennessee Pipe Master A Call

If you still have questions about how to safely and effectively thaw a frozen pipe in Franklin, Tennessee, please get in touch with a local plumbing professional for help. They can give you more advice and help ensure that your problem with frozen pipes is fixed quickly and easily. With their knowledge and experience, you can rest assured that your plumbing issues will be taken care of in no time!

Below are 25 examples for thawing residential frozen pipes

1. Apply a hot water bottle or heating pad to the affected pipe.

2. Place an electric space heater or a heat lamp near the frozen area to warm the environment and help thaw out the pipe.

3. Wrap towels soaked in hot water around the frozen pipe.

4. Apply heat with a hair dryer, making sure to keep the temperature low to avoid damaging the pipe.

5. Wrap an electric heating cable or heat tape around the affected area and plug it in.

6. Use a heat gun or propane torch to warm up the frozen area, but be careful not to damage the pipe with excessive heat.

7. Move furniture away from exterior walls to allow the warm air from heating vents to reach the affected area.

8. Open cabinet doors and drawers near frozen pipes to help circulate warm air around them.

9. Place a fan near any frozen areas to ensure that it stays in motion, allowing for more effective thawing of the pipe.

10. Use boiling water to pour over the affected area, being careful not to scald yourself in the process.

11. Place a space heater in the attic or crawlspace, close to where the frozen pipe is located.

12. Wrap an electric blanket around the frozen pipe, making sure that it does not come into direct contact with any insulation.

13. Put a hot water bottle or heating pad on the wall behind the frozen pipe, allowing heat to transfer through it to thaw out the pipe.

14. Use a portable heater to direct warm air toward any cold spots that may be causing pipes to freeze up. also open all interior doors to circulate the heat.

15. Seal off ventilation grates in the winter months to help keep warm air in the house and prevent frozen pipes.

16. Keep faucets running at a trickle during cold spells to help ensure that water keeps flowing through your pipes.

17. Cover any exposed pipes with insulation sleeves or wrap insulating material around them to help retain heat.

18. Apply heat to the affected pipe with a heating lamp or hot water heater.

19. Install insulation around your pipes and in any areas that could be prone to freezing temperatures.

20. Use an infrared heat ray to warm up frozen pipes, ensuring not to damage them by overheating them.

21. Place foam tubes around outdoor pipes to help insulate them from cold temperatures.

22. Connect two hoses together and fill one with hot water, then attach it to the affected pipe to thaw it out.

23. Create a tent-like structure over frozen pipes with towels or insulation to trap the warm air and help thaw out the pipe.

24. Place a dehumidifier in the area and turn it up to its highest setting, allowing warm air to help thaw out the pipe.

25. If all else fails, call a licensed plumbing professional for assistance with thawing your frozen pipes. Their knowledge and experience can help ensure that your frozen pipe problems are taken care of quickly and effectively.

Here Is My Favorite Way To Thaw A Frozen Pipe

My favorite way to thaw a pipe would be with a hair dryer on low. Just remember that frozen pipes thaw slowly when using a hair dryer. Patience is the key.

If a pipe bursts because you forgot to shut off the water, go to the shut off valve and turn the water off. Always open the faucet while thawing the pipe.

No matter how you handle a frozen pipe emergency in Franklin, Tennessee, you must be very careful to avoid doing more damage or getting hurt. If the pipe bursts, shut off the water.

Before you try anything, look up the right way to thaw something. This will help make sure the problem is fixed safely and correctly. Don’t use a hair dryer on high heat; only use low heat.

If you have any questions or need other plumbing help, please don’t hesitate to contact a local Franklin, TN, professional!

For more information, do a search for the following keyword phrases. pipes freeze, burst pipe, water meter shut off, thermostatically controlled heat tape, water pipes, water flowing through my house, unfreeze pipes, pour hot water over the pipe, thaw pipes, burst pipes, pipe thawing process, the water pressure of the pipe, enclosed pipes, melting water, crawl spaces pipe system, open faucet, open all the faucets and heat cable. Also, visit our Franklin, TN Emergency Plumbing Page for more information


Enter your contact details here to help us serve you better & faster.

Call Pipe Master Plumbing Today

When you want a plumbing company in Franklin, Brentwood, Columbia, Spring Hill and Mt. Pleasant, TN you can trust, call us for help. We would be honored to serve you.

24-Hours Emergency Services

Uniformed Licensed Plumbers

No Travel Charges

Free Estimates

Call Now Button931-215-1693 | Open 24/7