The most common problems with plumbing are clogs, leaks, and slow drains. These problems can be fixed with one or more of these three quick plumbing solutions: drain cleaner, plunger, and plumber’s snake.
Drain cleaner is also used to dissolve clogs and clear pipes. Plungers use suction to break up clogs by pushing them through the pipes. A plumbers snake is inserted into a drain pipe and then pushed through to break up clogs and clear obstructions in pipes.
Like the ones mentioned above, there is a need to find quick plumbing solutions. But are there other ways to fix plumbing problems quickly? In this article, we will discuss some of the best quick plumbing solutions that are out there.
Common Plumbing Problems and Their Easy Solutions
When it comes to plumbing emergencies, there is not always enough waiting time. They should be fixed as soon as possible, or matters could worsen. In some cases, quick plumbing solutions are done without a professional plumber’s help.
From leaky pipes, and clogged drains, to more serious issues such as a broken water heater, there are easy ways to fix the problems yourself while waiting for the plumber to arrive at your home. Common plumbing problems that you can DIY fix are the following:
- Running toilet
- Sewer system backup
- Low water pressure
- Clogged drains
Here are other common plumbing problems and how you can fix them by yourself:
Broken Water Heater
If your water heater is not working properly, you should shut it off first. It is most likely due to collected sediments inside the tank, which affects the heating element. As a result, the water heater wastes time and energy attempting to produce heat with all the accumulated sediments.
As a result, your water heater strains and could break down for good. Either you replace the water heater or drain your tank instead. Turn off the tank and run hot water in the house until the water tank has been emptied.
Check the pressure relief valve first to ensure it’s working, connect a garden hose, and clean the tank. After cleaning, restart the water heater and check if it already works better.
Leaking Pipes
Leaky pipes are also a common plumbing issue that should be fixed ASAP. The good news is that you can easily restore it before hiring a professional plumber as a last resort. Here are some tips to fix leaking pipes:
- Close the connecting valve to suspend the water flow.
- Check if your toilet, bathtubs, sinks, or showers have cracks. If there is, use a plumber’s putty to seal the crack. Then apply caulk directly over the putty after compressing it as much as possible.
- Use a rubber pipe to fit it snuggly around the leak. Lay a clamp over the rubber wrap to secure it further.
- In the worst-case scenario, you have to replace your broken bathroom fixtures. Call a professional plumbing service in Spring Hill, TN, today!
