The last thing every bathroom user has to deal with is a broken toilet. If you notice that your toilet is not flushing well and is powerful enough, you might have to consider finding a high-pressure toilet. You might also have to consider contacting a plumber because it could cause clogs that need to be removed ASAP.
Before that, you must understand the benefits of using a high-power flush toilet and whether it is the best choice.
Different types of high-power toilets
In case you don’t know yet, there are four types of high-power toilets specially made for residential purposes. These toilets have one thing in common: they all have more flushing power. You don’t have to flush twice to get the icky stuff down the pipe.
Siphon jet
It is a separate reservoir tank you can install together with other systems. A siphon jet lets water release with a vacuum pull that increases flushing power.
Double vortex
It also uses jets to create a powerful and satisfying flush. A double vortex toilet produces water from two nozzles at the drain and the top of the bowl, creating a powerful water flow with every color. It is commonly found in American Standard toilets.
Pressure-assisted
This toilet uses compressed air for a high-powered flush without too much water. On the downside, pressure-assisted toilets tend to be louder and more expensive.
Double Cyclone and Tornado Flush
These toilets use pressurized jets at the top of the bowl. These jets help flush the waste down and clean the bowl more efficiently.
Improve your toilet’s flush power with these tips
There are ways to improve toilet flush power without buying a new toilet bowl. Here are effective ways you can ensure a powerful and efficient flush every time:
Clean the rim jets.
The rim jets may be clogged with buildup over time. That is why it is important to clean your toilet rim jets regularly. You can use a thin wire from an unended wire coat hanger to scrape the mineral buildup.
Check for signs of clogging.
It could be because your pipes are clogged. That’s why water does not flow properly. Check your drains and pipes to see whether they are blocked and remove them.
Use homemade remedies.
Try using homemade remedies to unclog your toilet. Use a quart of white vinegar. Find the rubber hose attached to the overflow valve. Then, run a funnel into its end, pour the vinegar, and let it sit for about 15 minutes. Add baking soda bit by bit until you see it fizzing. Then, please wait for 2 more hours before you flush it.
Replace your flush valve.
If your flush valve is already broken, it is time to replace it. A damaged flush valve can affect flushing power.
On a side note, a low-flush toilet is not always bad. For one, it can help you save water if you don’t mind flushing twice or more. It is best to call a professional plumbing service in Spring Hill, TN, for your toilet repair needs. Contact one today!