Water Heaters Franklin Tennessee

Pipe Burst-House Flooding-Crawl Space Flooded
Water Heater Leaking-Sewage Backup-Gas Leak-Etc.


plumber installing a new hot water heater in a home

Get Free Estimate

Pipe Master Plumbing has 20+ years of experience repairing and installing nearly every type of project.

Whether you need a leak fixed, want to install a tankless water heater, need major plumbing renovation work done, need excavation and water lines repaired, or you just want a new shower head system installed…

We have you covered.

Our team is competent and guarantees the that the job is done right or our labor is free.

Water Heater Repair & Installation in Franklin, Brentwood, Columbia, Spring Hill, and Mt. Pleasant, TN.

Whether you have an electric or gas water heater, we offer an extensive range of water heater repair services. We repair standard tank as well as tankless units. From malfunctions in the thermostat to failed pilot lights in a gas system, we’ve seen it all, and repaired it all. With our repair services we check everything from valves to connections to sediment levels, and temperature and water pressure. Besides providing no hot water at all, some common issues we see in the field include:

Leaks: Anything from faulty temperature and pressure relief valves to excessive pressure or overheating can cause your water heater to leak. Some leaks may be simple to resolve. Pipes may just need to be tightened or the thermostat needs to be adjusted. At other times, parts like gaskets may need to be replaced.

Discoloration or odors: Corrosion inside a tank can cause rust-colored water. Failing anode rods can cause water discoloration as well. If these rods decay, they can create a rotten egg smell, and they will need to be replaced. Rotten egg smells can also be caused by a gas leak. If you suspect a gas leak, give us a call at (931) 215-1693, and we can check for the source.

Noises: Noises like rumbling result from boiling water caused by overheating due to sediment build-up. Whining noises are usually the result of scales building up on electrical heating elements.

No matter what kind of water heater repair you need, our services are fast and effective. We keep our vehicles fully stocked and ready to make any repair on the spot. We rarely have to wait on parts because we have them available. This speeds up our process, and ensures our customers they won’t be inconvenienced by a malfunctioning water heater for very long. You can also be assured that all the materials we use are high-quality, and often have individual warranties.

We Install Tankless Water Heaters
Guide to Drain Your Water Heater

How to Drain a Water Heater in Franklin, TN

Draining a Water Heater GuideThe Complete Guide to Draining Your Water Heater 

Maintaining a home in Franklin, Tennessee means being proactive about the various aspects of home maintenance, including your water heater.
It’s easy to forget about this critical piece of machinery until it stops working, leading to cold showers and a lack of hot water for your chores.
A crucial aspect of water heater maintenance is draining it periodically to remove sediment and prevent a decrease in its efficiency.
This article will guide you on how to drain your water heater correctly and safely.

Understanding Your Water Heater

In Franklin, the most common types of water heaters are gas and electric models. It is important to remove the plug from the main source of the electricity before starting the draining procedure.
For an electric heater, turn off the corresponding breaker in your home’s electrical panel.
For a gas heater, you must turn off the gas supply. 

Ways to Drain Your Water Heater 

  • Shut off the power supply: Depending on the kind of water heater, make sure to turn off the power supply before starting the draining procedure. For electric water heaters, switch off the circuit breaker.
    For gas water heaters, turn the gas control dial to the “off” position.
  • Connect a garden hose: Connect a garden hose to the drain valve at the bottom of the water heater.
    Make sure the other end of the hose is directed to a suitable drain or outside area.
  • Position the hose end: Position the other end of the hose to a place where it can safely drain.
    It’s important to remember that the water will be hot and could harm plants or cause injury.
  • Open the drain valve: Open the drain valve and allow the water to flow out of the water heater.
    Be cautious as the water may be very hot. Let it drain until the water runs clear or the tank is empty.
  • Open the pressure relief valve: This valve is typically located at the top or on the side of the tank.
    Opening it will allow air into the tank and help the water drain out faster.
  • Allow the tank to drain: Draining can take a few minutes to more than an hour.
    The size of your tank and the amount of sediment present would also matter.
  • Flush the tank: Once the water stops flowing, briefly turn on the water supply to flush out any remaining sediment.
    Do this until the water runs clear.
  • Close the valves and refill: After the water runs clear, close the drain and pressure relief valves and turn the water supply back on. Watch the flowing water from your tap until it runs without air bubbles.
  • Restore the power supply: Once the tank is full, turn the power or gas supply back on.
    For a gas heater, relight the pilot light following the manufacturer’s instructions.

Your water heater is now drained and ready for continued use.
It’s recommended to perform this maintenance task at least once a year to keep your water heater running efficiently and extend its lifespan. 

Draining Your Water Heater Is an Important Aspect of Home Maintenance

You can boost the lifespan of your heater, lessen your energy use, and ensure that you never run out of hot water by regularly using this technique.
However, don’t be hesitant of calling a local expert such as Pipe Master Plumbing in Franklin, TN, if you feel uneasy doing this task or run into problems while doing it.
They have the knowledge and experience to handle your water heater safely and effectively.
Remember, routine home maintenance is all about preventative care. 

Pilot Light of a Gas Heater

Where Is the Pilot Light on a Water Heater

Where is the Pilot LightLocating the Pilot Light on Your Water Heater: A Comprehensive Guide for Homeowners of Franklin

The pilot light is an essential component of many gas-powered devices in our homes, and that includes the gas water heater.
It’s a small, continuously burning flame that ignites the main burner to heat the water in your tank when required.
If your water heater isn’t heating up or you’ve recently drained it, you might need to locate and relight this pilot light.
But where do you find it? Let’s dive in and learn how to locate the pilot light on your water heater.

Getting to Know Your Water Heater

Water heaters come in two primary types: gas and electric. For gas water heaters, a pilot light is needed to ignite the main burner, whereas electric heaters do not have or need a pilot light as they use electrical resistance to generate heat.

How to Locate the Pilot Light on a Gas Water Heater

Please remember, safety should always be your primary concern when dealing with gas appliances.
If you ever smell gas in your Franklin home, immediately evacuate and call your gas company or a licensed professional near you.

Follow these steps to find the pilot light:

  • Identify your water heater: Look for a large tank, typically located in a basement, utility room, or garage.
    It could be standing upright or installed horizontally, depending on the space.
  • Find the gas control valve: Usually, the gas control valve is located at the bottom of the water heater.
    It is a box-like component with a knob for adjusting the temperature and a couple of other buttons or switches.
  • Identify the pilot light assembly: Within or adjacent to the gas control valve, you should find a removable cover or viewing window. Inside this area, you will see the pilot light assembly.
  • Look for the pilot light: The actual pilot light is a small flame that remains lit constantly.
    If your water heater is working correctly, you should see this flame. If not, you will only see the pilot light assembly.
  • Follow instructions for relighting: You must relight the pilot light if it is out.
    Most modern water heaters come with an igniter button for this purpose, but others may require a manual light with a long match or lighter.
    Always follow the manufacturer’s instructions on the side of the water heater for relighting procedures.

The Pilot Light Is Key to Your Water Heater’s Functionality

Understanding your water heater and being able to locate the pilot light is an important aspect of home maintenance.
The pilot light ensures you always have hot water when you need it. Remember, when dealing with gas appliances, safety is paramount.
If you smell gas, notice the pilot light is frequently going out, or you’re uncomfortable with relighting the pilot light yourself, always call in a professional such as Pipe Master Plumbing in Franklin, TN

Stay safe, and enjoy the warmth and comfort of reliable hot water in your home!

Best Water Heater in Franklin

What Is the Best Water Heater in Franklin

Best Water Heater in FranklinDiscovering the Best Water Heaters for Franklin, TN Homes

Choosing the right water heater for your home in Franklin, TN, requires careful consideration of various factors.
From energy efficiency to longevity, the perfect water heater should match your specific needs and climate conditions.
Here, we’ll explore some of the best water heaters suitable for homes in Franklin.

Understanding Your Needs

It is important that you know how to determine the demands of buying a water heater.
Before buying a water heater consider the size of your family, the installation place, and most importantly your budget.
Additionally, since Tennessee experiences a relatively mild climate, it might be beneficial to opt for heaters that can work efficiently in such conditions.

Best Water Heaters for Franklin, TN Homes

  • Rheem Performance Platinum: Rheem is a renowned brand in the water heater market, and their Performance Platinum series is a top pick. This model is popular for its energy efficiency and smart home compatibility.
    It also comes with a self-cleaning feature that reduces sediment buildup, improving longevity and efficiency.
  • A.O. Smith Signature Premier: Known for its durability and high energy efficiency, this model from A.O. Smith is a fantastic choice. The Signature Premier series offers both gas and electric options and includes a 12-year warranty, providing peace of mind for homeowners.
  • Bradford White RG240T6N: This gas water heater stands out for its exceptional build quality and advanced temperature control system. With a 40-gallon capacity, it’s a perfect fit for medium-sized families.
  • Navien NPE-240A: If you’re interested in tankless water heaters, the Navien NPE-240A is a high-performing choice.
    It provides an endless supply of hot water, saves space, and is very energy efficient.
    It’s an excellent option for larger households.
  • EcoSmart ECO 27: For electric tankless water heaters, the EcoSmart ECO 27 is a standout. It offers significant energy savings, compact design, and on-demand hot water.
    Given Franklin’s milder climate, this heater can handle even high-demand scenarios.

A Quality Water Heater Saves You Money in the Long Run

When it comes to selecting the best water heater for your Franklin, TN home, the options are vast.
It’s crucial to understand your home’s needs and choose a water heater that fits those requirements best.
Consider the energy source, size, efficiency, and your budget. Make sure to buy a quality water heater to avoid issues afterward.
Always consult with a local professional like Pipe Master Plumbing in Franklin, TN to ensure proper installation and compliance with local codes and regulations.

How Does It Work

How Does a Tankless Water Heater Work in Franklin

Unraveling the Magic of Tankless Water Heaters in Franklin


Tankless Water Heater Saves Energy up to 20%

In the beautiful city of Franklin, homeowners continuously strive to modernize their homes with energy-efficient solutions. One prominent innovation is the tankless water heater.
Unlike traditional water heaters, these devices don’t store hot water in a tank but heat water directly when needed. 
How do these modern marvels work?
Let’s dive into the working mechanism of tankless water heaters and their benefits for Franklin’s residents.

To kick things off, it’s vital to grasp the essential concept. Tankless water heaters, or the “on-demand” water heaters, generate hot water only when it’s required. It eliminates the need to store and continually heat water in a large tank.

When a hot water tap is turned on in a Franklin home equipped with a tankless heater, cold water travels through a pipe into the unit.
Here, either an electric element or a gas burner heats the water.
This process ensures hot water is available instantly, at your fingertips.

The heart of this innovation lies in its efficiency. 2 to 5 liters of hot water can be produced every minute with tankless water heaters. Gas-fired models can produce higher flow rates than their electric counterparts, thus serving bigger households more efficiently.

It involves more than just having hot water available right away.
The absence of a storage tank means no energy is wasted in keeping water hot when it’s not in use.
This aspect of tankless water heaters has led to their popularity in Franklin, a city committed to sustainable living.

A tankless water heater offers numerous benefits. It’s compact and takes up less space than traditional heaters.
Its lifespan exceeds conventional models by up to 5-10 years, given proper maintenance, reducing the frequency of replacements and cutting down costs in the long run.

You can save up to 20% on your energy bills compared to traditional water heaters which is why a lot of homeowners right now are considering switching to tankless water heaters.
These savings are particularly crucial in a city like Franklin, where utility costs are a significant portion of the household budget.

Despite the higher initial installation cost, the long-term savings make these heaters a smart investment. Many Franklin homeowners have noticed this and are transitioning from traditional to tankless water heaters.

Tankless water heaters also add a layer of convenience to your home. Say goodbye to cold showers because someone else used up all the hot water! With a tankless water heater, hot water is always available on demand.

The tankless water heater is an efficient, space-saving, and cost-effective solution for the 21st-century Franklin home.
The smart design of a tankless water heater eliminates the need for a bulky storage tank. It cuts down on energy consumption and delivers hot water only when needed. 

As Franklin embraces a future of energy efficiency and sustainability, the tankless water heater stands as a symbol of this transition.
If you’re in Franklin and considering a switch, remember that a tankless water heater isn’t just a luxury—it’s an investment in the future.

With a deep understanding of their working mechanism, Franklin homeowners can make an informed decision and reap the benefits of this remarkable innovation.
Have your tankless water heater installed today.
Get in touch with professionals like Pipe Master Plumbing in Franklin, TN for assistance.
The age of the tankless water heater in Franklin is truly upon us!

Tankless Water Heater Installation

The Ultimate Guide to Installing a Tankless Water Heater in Franklin, TN

Guide on How to Install a Tankless Water Heater

In the quest for energy-efficient homes in Franklin, TN, the tankless water heater has emerged as a star.
Tankless water heaters not only provide instant hot water but are also energy-saving.
Ready to make the switch? Let’s break down the steps involved in installing a tankless water heater.

Before we begin, remember, this is a task that involves working with gas, electricity, or both.
Unless you’re a seasoned DIY enthusiast or a professional, it’s advisable to seek help from certified experts in Franklin, TN, to ensure safety and adherence to local codes and regulations.

Step 1: Choose the Right Heater

Tankless water heaters come in electric and gas-fired models, and it’s important to select the one that suits your home’s infrastructure and needs best. Consider factors such as available power supply, desired flow rate, and size of the heater.

Step 2: Removal of the Old Unit

Turn off the water supply, power, and if applicable, gas. Drain the existing water heater and disconnect it from the supply lines.
It is important that you carefully do this process to avoid damages or accidents.

Step 3: Install the New Heater

Position the new unit at your chosen location, ensuring it is level. Use the manufacturer’s mounting guide to secure it in place.
Make sure to leave enough space for venting, particularly for gas models.

Step 4: Connect the Supply Lines

Install the water supply lines to the heater. If you’re using a gas model, connect the gas supply line as well.
Make sure all connections are tight and secure to prevent leaks.

Step 5: Install Venting

If you’re using a gas-fired unit, it will require a venting system. Follow the manufacturer’s instructions to install the venting correctly. Remember, proper venting is crucial for safety and optimal performance.

Step 6: Turn on the Heater

After checking all connections, restore the water supply, and power or gas supply to your heater.
Now, it’s time to test the unit. Turn on the hot water tap. Allow the water to run until it reaches its maximum temperature desired.

Step 7: Check for Leaks

While the unit is running, check for any signs of leaks in the gas and water lines.
If you notice any, turn off the unit and tighten the connections.

Remember, while these steps give a broad understanding, each model of tankless water heater may have specific installation requirements outlined in the user manual.
Always refer to the manufacturer’s instructions to ensure correct and safe installation.

Switching to Tankless Water Heater Can Save You a Lot of Money and Energy

Installing a tankless water heater in your Franklin home can be an excellent way to upgrade your home’s energy efficiency and enjoy an unlimited supply of hot water.
Take note also of the significant risks during the installation process.

Unless you are completely confident in your DIY skills, it’s strongly advised to hire a professional plumber or technician like Pipe Master Plumbing in Franklin, Tennessee.
They possess the necessary knowledge, skills, and tools, and will ensure your tankless water heater is installed safely and correctly in accordance with Franklin’s local codes

How Much Is a Tankless Water Heater in Franklin

How Much Does It Cost

Exploring the Cost of Tankless Water Heaters in Franklin: A Comprehensive Guide

If you’re a homeowner in Franklin and considering upgrading your water heating system to a tankless water heater, you may be curious about the associated costs.
Tankless water heaters offer numerous benefits, including energy efficiency, endless hot water supply, and space-saving design.
Understanding the price range and factors that influence the cost of tankless water heaters in Franklin is crucial to make an informed decision.
In this comprehensive guide, we will delve into the cost considerations specific to Franklin, providing you with valuable insights to help you budget and select the right tankless water heater for your home.

Equipment Costs:

The cost of a tankless water heater in Franklin can vary based on factors such as brand, size, and features.
Consider the budget of a tankless water heater. It ranges between $1000 to $3000 depending on the model and feature that you will have. Higher-end models with advanced features or larger capacities may fall on the higher end of the price range.

Installation Expenses:

Professional installation is recommended for tankless water heaters to ensure proper setup and functionality. The cost of the installation of your tankless water heater depends on different factors such as the following: 

– Complexity of the Installation

– Gas or Electrical Upgrades

– Modification of Your Plumbing System

To get an accurate estimate, it is advisable to consult with qualified plumbers or HVAC technicians in Franklin who can assess your specific requirements such as those Pipe Master Plumbing in Franklin.

Additional Factors:

In Franklin, there are a few additional factors that can impact the overall cost of a tankless water heater:

a. Permits and Codes: Depending on local regulations and building codes, you may need to obtain permits for the installation.
It’s important to factor in any associated fees when budgeting for your tankless water heater.

b. Regional Pricing: Prices of tankless water heaters may vary slightly from one region to another.
Factors such as local market demand, competition among suppliers, and shipping costs can influence the pricing in Franklin.
Obtaining quotes from multiple reputable suppliers or contacting local distributors can help you compare prices and make an informed decision.

Long-Term Savings:

The upfront cost of a tankless water heater may be higher than that of a traditional tank-based unit but the long-term savings can outweigh the initial investment.
Tankless models are renowned for their energy efficiency, as they only heat water on demand.
This efficient operation can lead to significant savings on your energy bills over time, making tankless water heaters a cost-effective choice.

It’s Important to Consider the Tankless Water Heater Cost and Installation Expenses

When considering the cost of a tankless water heater in Franklin, it’s important to factor in both the equipment and installation expenses.
While the price range for tankless water heaters can vary, consulting with local professionals like those at Pipe Master Plumbing in Franklin and suppliers will provide you with accurate estimates based on your specific requirements.
Remember to consider the long-term savings in energy costs and the extended lifespan of tankless models when evaluating the overall value.
By weighing the costs and benefits, you can make an informed decision and enjoy the energy-efficient and convenient hot water supply that a tankless water heater offers in your Franklin home.

When to Replace Water Heater

When to Replace Water Heater in Franklin

Recognizing the Right Time to Replace Your Water Heater in Franklin


Time to Replace Your Water Heater

Every homeowner in Franklin understands the essential role water heaters play in their everyday lives.
This item offers great convenience, whether you need a relaxing shower on a chilly day or want to effectively clean oily dishes. It’s truly a helpful tool that provides comfort.
Just like anything else, every water heater has a timeline.
Let’s now discuss when it’s appropriate to replace your home’s water heater.

Age of the Water Heater

A conventional water heater with a tank will last for 8 to 12 years.
A tankless water heater, on the other hand, has a longer lifespan, reaching up to 20 years or more.
It’s time to replace your water heater if it’s giving you a lot of problems.

Over time, it may be more economical to purchase a new item instead of constantly repairing it.

Rusty Water

Rusty water dripping from your faucets while using hot water could be a sign of rust on the inside of your water heater.
This problem might lead to leaks in the future if not addressed immediately.
It is crucial to replace your water heater before it starts leaking to avoid further complications.

Frequent Repairs

A water heater that needs frequent repairs might be nearing the end of its life.
If you find yourself regularly calling the plumber to fix various issues, it could be more economical to replace the heater altogether.
The cost of consistent repairs can add up over time and surpass the price of a new unit.

Inadequate Heating

Your water heater could be defective if it’s no longer producing hot water or it’s taking longer than usual to hot your water.
A faulty thermostat, heating element, or heater that is undersized for your needs could be the reason why your water heater is not functioning properly.
Consult a professional like Pipe Master Plumbing in Franklin, TN, to ascertain the issue and consider a replacement if necessary.


Water leaks around your heater could mean that the inner tank has reached its breaking point.
When the metal heats, it expands; if there are slight fractures, water may leak from the tank.
As the metal cools, the inner tank leaks, but this is an unmistakable indicator that your water heater needs to be replaced.

Knowing When Is the Right Time to Replace Your Water Heater Is Important

Replacing your water heater at the right time can prevent a lot of inconvenient and potentially costly issues.
Understanding these signs will enable you to act promptly and ensure a consistent supply of hot water in your Franklin home.

Don’t wait for a catastrophic failure; if you notice any of these signs, it’s time to call in a professional, such as Pipe Master Plumbing in Franklin, and consider a new water heater.
It’s important to remember that efficient water heaters aren’t just about comfort; they’re also about reliability and long-term cost savings. 

Is a Leaking Water Heater Dangerous in Franklin

Potential Flooding Due to Water Heater Leakage

Understanding the Risks: Is a Leaking Water Heater Dangerous?

Many Franklin, Tennessee, homeowners have faced the problem of a leaking water heater at one point or another. The immediate concerns usually revolve around damage to flooring, walls, and other items due to the water.
The dangers of a leaking water heater extend beyond mere water damage.
It’s crucial to understand these risks to protect your home and family.

Potential Flooding

The most apparent danger of a leaking water heater is potential flooding.
When your water heater cracks, it will automatically release a lot of water.
This water can cause huge damage to your home. It may even lead to structural damage, especially if your water heater is located in your basement or at a higher level of your house.

Mold and Mildew

Mold and mildew thrive in the presence of excess moisture from a leaky water heater.
These microorganisms can cause indoor air pollution and other health problems.
It’s essential to address any leaks as soon as possible to prevent mold and mildew from forming.

Electrical Hazards

Water and electricity are a dangerous combination. Water from a leaking heater can cause electrocution or fire if it comes into contact with an electrical outlet, wires, or the heater’s electrical components.
Always ensure that your water heater and its surroundings are dry and safe.

Gas Leaks

If your water heater runs on gas, a leak could result in a gas leak if the water causes damage to the gas control valve.
When you inhale gas fumes, it is dangerous for your health. If the gas builds up inside your house, it can lead to a gas explosion, which we never wanted to happen. 
If you smell gas in your home, immediately evacuate and call your gas company’s emergency line.

Structural Damage

Consistent leaking, if unattended, can cause structural damage over time. Excessive water can weaken wooden beams and cause the drywall to disintegrate. It’s critical to ensure that water leaks are promptly addressed to maintain the structural integrity of your home.

If Your Water Heater Is Leaking, It’s Important to Act Fast

A leaking water heater can indeed be dangerous, presenting a variety of risks to your home and health.
As a Franklin homeowner, if you notice your water heater leaking, it is crucial to act promptly.
Turn off the power source and water supply to your heater. Clean up the water to prevent further damage.
Call a local, experienced professional such as Pipe Master Plumbing in Franklin, Tennessee, to evaluate the situation and recommend the best course of action.

Safety inside your home should come first. Ignoring a leaking water heater is never worth the potential risks.
With immediate action, you can minimize the dangers and keep your home safe and dry.,

Who Fixes The Water Heater

Who Fixes the Water Heater in Franklin, TN

Plumber Fixing a Water Heater

Navigating Your Options: Who Fixes Water Heaters in Franklin?

Finding a professional to repair your water heater, especially if it’s an emergency, might take a while.
Fortunately, in Franklin, you’re not short of options. Here’s a guide on who to turn to when you need water heater repair services.


Your first line of contact when dealing with a faulty water heater is usually a professional plumber, such as Pipe Master Plumbing in Franklin, TN.
Most plumbing companies in Franklin are well-equipped to handle water heater issues, given that these appliances are part of the home’s plumbing system.
Services they offer include repairing leaks, replacing faulty heating elements, fixing thermostats, and even installing new water heaters when needed.

HVAC Companies

Many HVAC companies also offer water heater repair services.
HVAC professionals are trained to understand heating systems, including water heaters.
They can diagnose issues with your appliance and provide appropriate fixes, from addressing insufficient heating problems to fixing faulty temperature pressure relief valves.

Appliance Repair Services

Some appliance repair services in Franklin also handle water heater issues.
These technicians are trained on how to properly diagnose and repair different appliances at home, including water heaters.
However, it’s essential to confirm whether a given appliance repair service caters to water heaters before enlisting their services.

Utility Companies

If you rent your water heater from a utility company, they should provide repair services for the unit.
If you encounter any issues with your appliances, you can get in touch with them for assistance.
If you have your own water heater, this option might not be available for you.

Home Warranty or Insurance Companies

If your home warranty or insurance covers your water heater, you might be entitled to repair services at little to no cost.
In such a case, contact your provider to learn about your coverage and the process of arranging for repairs.
They usually have a network of approved service providers from which you can choose.

The Key to Effective Water Heater Repair Is Prompt Action

When water heaters start malfunctioning, it is already a headache.
There are many professional plumbers in Franklin, like Pipe Master Plumbing Company. HVAC is also available in the area.
You can also call appliance repair technicians and utility companies.
If you have invested in a home warranty and insurance company, now is the best time to make use of your policy.

If you notice any signs of trouble, don’t hesitate to contact a professional such as those Pipe Master Plumber in Franklin, Tennessee.  
They will diagnose and fix the issue, ensuring you enjoy a consistent supply of hot water in your home.

Can a Water Heater Explode in Franklin

Can a Water Heater Explode

The Unthinkable: Can a Water Heater Actually Explode?

You likely don’t often think about your water heater – it’s one of your household’s unnoticed, unsung heroes that you only notice when it suddenly fails.
But did you know that a water heater can explode in rare circumstances?

Let’s get into the details of how to avoid your water heater exploding in your home.
Let’s understand the potential causes and preventive measures that we can take for the safety of your home. 

Under What Circumstances Can a Water Heater Explode?

An explosion caused by a water heater looks improbable at first.
After all, we have used these appliances in our homes without problem for years.
However, certain conditions can lead to this dire situation. 
The main factor is a combination of heat and pressure.
Water heaters are appliances that store and heat water to a set temperature for use in homes.
However, there is a chance that the tank will explode if the pressure within the water heater rises too much.
An explosion of a water heater can happen due to a malfunctioning temperature-pressure (T&P) relief valve.
It is designed to release water when the temperature or pressure becomes too high.
If this valve gets blocked or malfunctions, the heat, and pressure can build up inside the tank, leading to a possible explosion.
Another factor that could contribute to an explosion is sediment buildup. Minerals from hard water can collect at the bottom of the tank, causing the water heater to overwork and overheat. The extreme heat can cause the tank’s metal to weaken and rupture.

What Can You Do to Prevent a Water Heater Explosion?

While the possibility of a water heater explosion sounds alarming, don’t panic. There are several ways to mitigate the risks associated with water heater failure:

Regular Inspections and Maintenance: Routine checks by a professional like Pipe Master Plumbing can identify any problems, such as a malfunctioning T&P valve or excessive sediment buildup. They can replace or repair any faulty components and ensure your water heater is in good working condition.

Installing a Temperature-Pressure Relief Valve: If your water heater does not already have a T&P valve, installing one is a key safety measure. This valve releases excess pressure from the tank, preventing it from reaching dangerous levels.

Flushing Your Water Heater: Regularly flushing your water heater can prevent sediment from building up in the tank. Through flushing it can prevent possible explosions and it will improve the efficiency of your water heater at home.

Setting the Right Temperature: To avoid the explosion of your unit it is important that you are aware what is the right temperature. Set the water heater temperature at 120°F (49°C) or lower. This way can prevent excess heat and pressure from building up in the tank. Lower temperatures reduce the risk of scalding and are more efficient than higher temperatures. Higher settings can not only cause burns but can also increase pressure in the tank.  

Water Heater Explosion Is a Rare Occurrence but It Will Bring Hazards at Home When It Happens

By understanding the causes and implementing preventative measures, you can ensure that your water heater continues to serve your household safely and efficiently.

At Pipe Master Plumbing in Franklin, we believe in educating our clients on everything they need to know to keep their homes safe and comfortable. Regular maintenance, inspections, and care can ensure that your water heater, the unsung hero of your household, continues its vital work without posing a risk to your safety. Don’t wait until it’s too late – schedule an appointment today with Pipe Master Plumbing in Franklin, Tennessee. 

Cleaning a Tankless Water Heater

How to Clean Tankless Water Heater in Franklin

Cleaning Tools

Comprehensive Guide on Cleaning Tankless Water Heaters

Tankless water heaters are the best choice especially if you are living in Franklin.
However, even these advanced systems require regular maintenance to perform at their best.
In particular, cleaning your tankless water heater is crucial to maintaining its efficiency and longevity.
This comprehensive guide will walk you through the steps needed to clean your tankless water heater.

Why Clean a Tankless Water Heater?

Before we get into the ‘how,’ let’s discuss the ‘why.’ Tankless water heaters, like traditional tank models, can build up minerals such as calcium and lime over time, especially if your home uses hard water.
This buildup can lead to decreased efficiency, reduced lifespan, and even system failure if left unattended.
Regular cleaning (also known as descaling) can prevent these issues and keep your tankless water heater functioning smoothly.

Cleaning Your Tankless Water Heater: A Step-by-Step Guide

What You’ll Need:

  • 2.5 Gallons of White Vinegar
  • Non-toxic, colorless Descaler (optional)
  • A Submersible Pump
  • 2 Washing Machine Hoses
  • A Bucket
  • Protective Gloves and Eyewear

Step 1: Turn Off the Power

Before you start, ensure that your tankless water heater is completely powered off.
This is not only for the device’s safety but also for your own.

Step 2: Close the Water Valves

Your tankless water heater should have three water valves connected to it – the hot, cold, and main water valves.
Make sure all of these are closed to prevent water from flowing into the unit during the cleaning process.

Step 3: Connect the Hoses

Connect the washing machine hose to the hot water valve and the other to the cold water valve.
The other ends of these hoses should be placed in the bucket.

Step 4: Prepare the Cleaning Solution

Pour the bucket with 2.5 gallons of white vinegar. While vinegar is a safe and natural choice for descaling, you can also use a non-toxic, colorless commercial descaler.

Step 5: Start the Pump

Place the submersible pump in the bucket and connect it to an outlet.
Ensure that it’s pumping the vinegar/descaling solution into the cold water valve and out from the hot water valve, circulating through the heater.

Step 6: Let the Solution Circulate

Let the cleaning solution circulate through the tankless water heater for approximately 45 minutes to an hour to ensure any mineral deposits are adequately dissolved.

Step 7: Flush and Rinse

After descaling, remove the hoses, open the main water valve, and flush the water heater with fresh water for about five minutes.
Repeat this process several times to ensure that all the vinegar or descaler is thoroughly rinsed away.

Step 8: Reconnect the Water Heater

Once the system is thoroughly flushed and cleaned, close the main water valve and disconnect the hoses.
Now it’s time to open again all the water valves. Connect the heater to the power source and you are all set. 

Maintaining a Clean Tankless Water Heater Can Expand its Lifespan

Cleaning your tankless water heater is a crucial step in ensuring its optimal performance and extending its lifespan.
The procedure of cleaning a tankless water heater can be difficult but with the right tools and practice you can easily do this routine at home. 

Remember, preventative care is always easier and more cost-effective than repairs or replacements.
As always, if you’re uncomfortable performing these steps yourself, consider hiring a professional service such as Pipe Master Plumbing.

Here at Pipe Master Plumber in Franklin, we’re committed to providing you with the resources and services needed to keep tankless water heaters clean. 

Downside of Tankless Water Heater

What Is the Downside of a Tankless Water Heater

Tankless Water Heater has a Higher Cost

Understanding the Downside of Tankless Water Heaters: A Comprehensive Guide

Although tankless water heaters have become increasingly popular because of their efficient use of energy, smaller size, and unlimited hot water supply, they still have some disadvantages.
Let’s talk about the downsides of tankless water heaters to better help you make a decision in buying a water heater.

1. High Initial Cost

The first, and perhaps most significant, downside of tankless water heaters is their high initial cost.
They are generally more expensive to purchase and install than traditional tank-style heaters.
These units require high-powered burners and special venting requirements, all of which contribute to the higher upfront cost.
Yes! Tankless water heaters may be expensive but they provide energy savings over time. 

2. Limitations on Simultaneous Usage

Tankless water heaters provide hot water on demand, but there can be limitations on simultaneous usage.
 If multiple units require hot water simultaneously the heater may not be able to produce the same heat which may lead to providing lukewarm water.

3. Inconsistent Water Temperatures

Sometimes, tankless water heaters can deliver hot water with inconsistent temperatures, often referred to as “cold water sandwiches.” This phenomenon can occur when the hot water tap is turned off and on in quick succession, causing brief bursts of cold water between the hot water flow.

4. Requirement for Regular Maintenance

Tankless water heaters, particularly those used in areas with hard water, require regular maintenance to prevent mineral scale buildup that can hamper performance.
While cleaning and descaling are generally simple processes, they do represent an ongoing requirement that can be viewed as a downside for some homeowners.

5. Retrofitting Complications

If you’re replacing a traditional water heater with a tankless system in an existing home, there may be some challenges.
Modifications might be needed for gas lines, venting systems, and electrical systems to accommodate the new unit.
This retrofitting can add to the overall installation cost.

6. Potential for Waste

While tankless water heaters are more energy-efficient overall, they can lead to wasted water.
Since these heaters need a few seconds to heat the water to the desired temperature, homeowners may leave the tap running longer, which can waste water.

The Downside of Tankless Water Heaters Are Not That Deal Breakers

The tankless water heater has been successful in so many ways.
Just like any appliances found inside our home, they come with their own set of challenges.
The downsides mentioned above are not deal-breakers but factors to consider while deciding whether a tankless water heater is the right choice for you.

Now that you understand the drawbacks of tankless water heaters, it’s time to decide on your water heater.
If you decided to get and have a tankless water heater installed on your property, our team of experts in Pipe Master Plumbing is here to guide you every step of the way.
Reach out to Pipe Master Plumbing in Franklin, today to learn more about your water heating options.

Size of Tankless Water Heater

What Size of Tankless Water Heater Do I Need in Franklin

Galloons Per Minute

Understanding the Size of a Tankless Water Heater I Need

Choosing the proper size tankless water heater for your Franklin, TN, home is crucial to meeting your individual demands.
Tankless water heaters provide numerous benefits, including energy efficiency, space savings, and an endless hot water supply.
However, determining the appropriate size can be a bit confusing. In this comprehensive guide, we will walk you through the factors to consider and help you determine the ideal tankless water heater size for your Franklin, TN, home.

I. Understanding Tankless Water Heaters:

Before diving into the sizing process, it’s crucial to understand how tankless water heaters work.
Unlike traditional water heaters with large storage tanks, tankless units heat water on demand.
They use powerful heating elements or burners to rapidly heat the water as it flows through the unit, ensuring you have hot water whenever you need it.

II. Factors to Consider:

Several factors influence the size of the tankless water heater you’ll need for your Franklin, TN home. Consider the following:

  • Average Hot Water Demand

Assess your household’s hot water needs by considering the number of occupants and their daily hot water usage.
Factors like the number of bathrooms, appliances, and simultaneous water usage should be considered.

  • Climate

Franklin, TN experiences varying climatic conditions throughout the year.
The incoming groundwater temperature affects the workload of your tankless water heater.
The colder the incoming water, the more effort the unit needs to heat it to the desired temperature.

  • Flow Rate and Temperature Rise

Determine the desired flow rate in gallons per minute (GPM) for different fixtures and appliances.
Calculate the temperature rise needed, which is the difference between the desired hot water temperature and the incoming groundwater temperature.

III. Sizing Calculation:

To calculate the size of your tankless water heater, follow these steps:

Determine the Total GPM Requirement:

Calculate the flow rate of all fixtures or appliances that may be in use at the same time, such as showerheads and dishwashers.

Calculate Temperature Rise:

Subtract the average groundwater temperature (typically around 55°F in Franklin, TN) from the desired hot water temperature. The result is the temperature rise needed.

Consult the Manufacturer’s Sizing Chart:

Using the total GPM requirement and temperature rise, consult the manufacturer’s sizing chart or calculator specific to the tankless water heater brand you are considering. It will recommend the appropriate unit size based on your calculations.

IV. Professional Evaluation:

While the above steps provide a general guideline, it’s always wise to consult a professional plumber or HVAC technician for a thorough evaluation.
They can assess your home’s specific requirements, identify any unique circumstances, and provide personalized recommendations.

Knowing the Right Size of Your Desired Tankless Water Is Important

Selecting the right size tankless water heater for your Franklin, TN, home is crucial to ensuring a continuous supply of hot water while maximizing energy efficiency.
By considering factors such as hot water demand, climate, flow rate, and temperature rise, you can make an informed decision.
Remember, professional advice is invaluable, so don’t hesitate to seek expert assistance for accurate sizing and installation.
Pipe Master Plumber in Franklin is available for your professional assistance.

Remember to consult local building codes, obtain necessary permits, and follow manufacturer guidelines when installing your tankless water heater.
Enjoy the benefits of energy-efficient, on-demand hot water with the perfectly sized tankless water heater for your Franklin, TN, home!

Tankless Water Heater Are Worth It

Are Tankless Water Heaters Worth It in Franklin, TN

Is Tankless Water Heater Worth It

The Real Worth of Tankless Water Heaters in Franklin, TN: A Comprehensive Analysis

Homeowners in Franklin, Tennessee, are constantly looking for ways to enhance their home’s efficiency and convenience. One such modern amenity that has grown in popularity is the tankless water heater.
These devices promise endless hot water, reduced energy consumption, and longer lifespans compared to their traditional tank counterparts. But the question remains: Are tankless water heaters really worth it in Franklin, TN?

Understanding Tankless Water Heaters

Firstly, let’s get a clear understanding of what a tankless water heater is.
Unlike traditional models that store and continuously heat water in a large tank, tankless water heaters, also known as on-demand or instantaneous water heaters, heat water directly without the use of a storage tank.
When a hot water tap is turned on, cold water travels through a pipe into the unit, and a gas burner or electric element heats the water.
As a result, tankless water heaters deliver a constant supply of hot water.

The Pros of Tankless Water Heaters

There are several benefits that homeowners in Franklin can enjoy with tankless water heaters.

Energy Efficiency: Tankless water heaters are more energy-efficient as they only heat water when it’s needed, reducing the cost associated with maintaining a supply of hot water in a tank.
The U.S. Department of Energy says that for homes using 41 gallons of hot water or less per day, a tankless water heater can save 24% to 34% more energy than a traditional storage-tank water heater.

Continuous Hot Water Supply: If you’ve ever been the last person to shower in a busy household, you’ll appreciate the endless hot water supply from a tankless heater.
This can be particularly handy during Franklin’s cooler months.

Longer Lifespan: On average, tankless water heaters last longer than traditional models.
Compared to the tank-style water heater, which has a lifespan of only 10–15 years. This tankless water heater can last up to 20 years.

The Cons of Tankless Water Heaters

However, like any technology, tankless water heaters have their drawbacks.

Higher Upfront Cost: Tankless models tend to be more expensive upfront than traditional tank heaters.
This includes the unit and installation costs, which may include changes to your home’s plumbing and electrical wiring.

Output Limitations: If you have a large household and multiple appliances are simultaneously demanding hot water, a single tankless unit may not keep up. However, this can be remedied by installing multiple units.

Tankless Water Heaters are Worth the Investment for Homeowners

The decision ultimately depends on your specific circumstances.
If you’re planning to stay in your home for several years, appreciate the convenience of endless hot water, and wish to lower your energy bills, a tankless water heater might be a good fit.
Regardless of the higher upfront costs, it is still the most-demand water heater because of the benefits it can provide your household for a longer period of time. 

Additionally, it’s worth noting that Tennessee sees relatively mild winters, which means less strain on your water heating system and optimal conditions for a tankless water heater’s efficiency.

The tankless water heater has proven its worth in our household.
As a homeowner, you can now make a good decision and consider your individual needs and long-term plans.
Before making your decision, consult with a local plumber near you like Pipe Master Plumbing in Franklin. At Pipe Master Plumber, we understand the building codes, and we can guide you with the selection and installation process of your water heater.

How Long Does Water Heater Heat Up

How Long Does a Water Heater Take To Heat Up

It's Time to Heat Up

A Comprehensive Guide: How Long Does It Take for a Water Heater to Heat Up in Franklin, TN? 

In the ever-changing weather of Franklin, Tennessee, hot water is a crucial commodity for our everyday comfort.
It is something that you don’t keep in mind, but everything changes when you turn on the tap, and you’ll end up freezing in the cold water. It is best if we have knowledge of how long our water heater needs to warm up so we can plan ahead. 

Traditional Tank Water Heaters

Traditional tank water heaters are the most common type in many Franklin homes.
These heaters operate by storing water in a large tank and maintaining it at a set temperature. But how long does it take for such a heater to deliver that comforting warm water?

There are factors that we need to consider when determining how fast a water heater can heat up:

Tank Size: When your tank size is large, expect that it will heat up longer compared to a smaller one.
Imagine a 40-gallon tank that will take about 1 to 2 hours to heat up. An 80-gallon tank will take 2 to 3 hours to heat up.

Starting Temperature: The initial temperature of the water also plays a significant role.
Colder inlet water temperatures, often experienced in Franklin’s winter months, will increase the time required to heat the water.

Heater Type: Gas heaters usually heat up faster than electric models.
A gas heater can heat 40 gallons of water in 30 to 40 minutes.
An equivalent amount of water, if heated up using an electric water heater, will take an hour or more to produce hot water. 

Tankless Water Heaters

Unlike traditional water heaters, tankless or on-demand heaters do not store water but heat it instantaneously as it flows through the unit.
This means that as soon as the system is operational, you’ll have hot water in seconds.
However, there’s a phenomenon known as a ‘cold water sandwich” that you should be aware of.
This occurs when there is a small amount of residual cold water in the pipes from prior use, which you may see before the hot water starts flowing. There’s nothing to worry about as this “cold water sandwich” would only last for a few seconds. 

Heat Pump Water Heaters

Heat pump water heaters, an energy-efficient alternative, work differently by transferring heat from the air or ground to warm the water. This type of water heater takes longer to heat water compared to traditional models. On average, these heaters might take up to 4 hours to heat a full tank.

Factors Influencing the Heating Time

Apart from the type of heater and the water volume, other factors might influence the heating time.
These include the heater’s age, maintenance level, and desired temperature setting.
For optimal performance, regular maintenance of your water heater is advised.

Different Types of Water Heaters Take Different Amounts of Time to Heat Up

The time taken for a water heater to heat up in Franklin, TN, varies significantly based on the type of heater, its capacity, and a few other influencing factors.
Knowing how long your system takes to provide hot water can help you schedule your daily activities better and enjoy a warm bath or shower just when you need it.
If you are not sure about your water heater’s performance, get professional advice from a local plumber near you, like Pipe Master Plumbing in Franklin. We can provide you with an overview and give recommendations before buying a new water heater. 

How to Flush Your Water Heater

How to Flush a Water Heater in Franklin

How to Flush Water Heater

The Comprehensive Guide to Flushing a Water Heater in Franklin

Your water heater at home is your best friend, especially during the winter seasons.
It’s necessary to ensure that it is working efficiently and it will have a longer lifespan at your home. 
Don’t worry we will guide you through the process of flushing a water heater.

Why You Need to Flush Your Water Heater

Flushing your water heater is a maintenance procedure that helps extend the longevity of your unit.
Sediment build-up from hard water can cause your water heater to work harder than necessary, reduce its efficiency, and eventually cause damage. To ensure that you have continuous hot water flow at home make sure to regularly flush your water heater. 

When to Flush Your Water Heater

When to flush your water heater at home may depend on different factors.
We have to consider the hardness of the water. How often it’s being used and of course your water heater’s model.
Generally, however, it’s recommended that your water heater be flushed at least once per year.

What You’ll Need

Here’s a list of tools you’ll need to successfully flush your water heater:

  • Garden hose
  • Protective gloves
  • Bucket
  • Screwdriver or wrench
  • Protective goggles

Step-by-Step Guide to Flushing a Water Heater

Step 1: Turn Off the Water Heater

For gas water heaters, turn the thermostat to the “pilot” setting. For electric water heaters, turn off the power from the circuit breaker.

Step 2: Attach the Garden Hose

Connect your garden hose to the drain valve located at the bottom of the water heater.
Ensure the other end of the hose is directed towards a floor drain or outside.
Be aware that the water can be extremely hot, so take necessary precautions.

Step 3: Drain the Water Heater

Open the drain valve to let the water out. You can also open the pressure relief valve for faster draining but be careful as the water will be hot.

Step 4: Flush the Tank

Once all the water is drained from the tank, run the cold water back into the tank.
Running cold water on your water heater will help flush out any remaining sediment.

Step 5: Refill the Tank

Close the drain and pressure relief valves and turn on the cold water supply.
As the tank fills, open a hot water faucet in your house to let air escape.

Step 6: Restart the Water Heater

Turn on your water heater at home once the tank is full and the water is flowing without air from the faucet. 

Flush Your Water Heater Regularly 

Flushing your water heater is an essential maintenance practice that you should carry out regularly.
It helps enhance the efficiency of your water heater and extend its lifespan. 
It is best to get professional help like those who are from Pipe Master Plumbing in Franklin, TN if you are in doubt about taking this step-by-step guide in flushing your water heater.

Remember, regular maintenance can save you from the expense and inconvenience of a broken water heater during the coldest days of Franklin winters. Happy Flushing!

How to Turn on Hot Water Heater in Franklin, TN

Turning On your water heater

The Comprehensive Guide to Turning on a Hot Water Heater 

Have you ever imagined yourself restarting your water heater at home?
I know that sometimes you think turning back on your water heater is complicated but I can assure you it’s not.
We’ll walk you through different procedures on how to turn on a hot water heater.

Importance of Properly Turning on a Water Heater

Turning on your water heater correctly is as crucial as maintaining it. Doing it the right way ensures that your heater operates safely and efficiently, prolonging its lifespan and allowing you to enjoy a steady supply of hot water in your Franklin home.

What You’ll Need

Turning on your water heater does not need any powerful tool. Just make sure you have these:

  • Access to your water heater and its controls
  • Knowledge of whether you have a gas or electric water heater


How to Turn On an Electric Water Heater

Step 1: Ensure the Tank is Full

Turn on your water heater when the tank is full. If the tank isn’t full when you restore power, you risk damaging the heating element.

Step 2: Restore Power

Turn the circuit breaker to the “on” position once your tank is full.

Step 3: Adjust the Thermostat

Find the thermostat of your water heater. Set it to the temperature you want. The recommended setting is usually around 120-125 degrees Fahrenheit.

How to Turn On a Gas Water Heater

Step 1: Fill the Tank

Just like with an electric water heater, ensure the tank is full before you do anything else.

Step 2: Turn the Gas On

You can turn the gas back on, once the tank is full. The gas valve should be located near the bottom of your tank.

Step 3: Light the Pilot Light

If your gas water heater has a pilot light, follow the instructions on your heater to light it. This usually involves holding down a button and using a lighter or ignition switch to light the pilot.

Step 4: Adjust the Thermostat

Set your thermostat to your desired temperature. As with electric heaters, 120-125 degrees Fahrenheit is a common recommendation.

Turning on a Water Heater Is Simple

Whether you have a gas or electric hot water heater at home turning it on is not that complicated. However, always remember to ensure safety when dealing with these appliances. Call a professional like Pipe Master Plumbing in Franklin if you are having a difficult time doing the procedure.

We hope this guide helps you in your Franklin homes and that you enjoy your hot showers and warm water needs without any hitches!

Turning Up Your Water Heater

How to Turn Up Hot Water in Franklin

How to Turn Up Your Water Heater

How to Turn Up Your Hot Water Heater: A Comprehensive Guide

Have you ever had a situation where the water in your hot water heater isn’t hot enough?
Are you taking a shower and you are getting lukewarm water instead of hot water?
It is time to turn up your water heater.
Here we will discuss how to turn up your hot water heater. 

Why Turn Up Your Water Heater

Most homes set the hot water temperature between 120-140 degrees Fahrenheit. However, different households have different needs.
You might need hotter water for a variety of reasons, such as colder weather, increased usage, or sanitation needs.
By turning up your water heater, you can achieve the perfect temperature for your requirements.

Safety Precautions

Take note before your turn up your water heater consider that the increase in temperature may cause a risk of burning. 
It’s recommended never to set the temperature above 140 degrees Fahrenheit.
If you need to increase the temperature, do it in small increments and monitor the water to avoid accidents.

How to Turn Up an Electric Water Heater

Step 1: Locate the Thermostat

On most electric water heaters, the thermostat is behind a cover plate. You may need a screwdriver to remove this.

Step 2: Adjust the Temperature

On your water heater panel, you will see a dial or digital interface where you can adjust the temperature.
Set the temperature at your desired setting. Be careful not to exceed 140 degrees Fahrenheit.

Step 3: Replace the Cover

Put the cover plate back on the water heater, ensuring it’s secure.

How to Turn Up a Gas Water Heater

Step 1: Locate the Control Dial

The control dial on a gas water heater is typically located toward the bottom of the unit.

Step 2: Adjust the Temperature

Increase the temperature by turning on the dial. Again, be careful not to exceed 140 degrees Fahrenheit.

Turning Up Your Water Heater is Easy But Make Sure to Take Extra Precaution

Turning up your water heater is just a piece of cake. You just need to know where are the switch panel so you can make the necessary adjustments. Remember to take safety precautions when adjusting the temperature and to check the hot water before using it to avoid scalds.
You can always refer to your water heater’s manual guide to gain extra knowledge, especially on how to locate the controls.
If you are not sure about the procedure always seek professional help. 

At Pipe Master Plumber, we are trained and properly equipped on how to turn up your water heater. 

Turning Off a Water Heater

How to Turn Off Hot Water in Franklin

How to Turn Off Water Heater

The Definitive Guide to Turning Off a Water Heater in Franklin, TN

The water heater is very important at home. It provides you with hot showers and clean dishes.
If not maintained properly your water heater can be dangerous. Your water heater at home needs a break from time to time.
Reasons could be because you are having maintenance, going out for a vacation, or unforeseen events.
The question is, how to turn off your water heater? Here we will talk about procedures on how to turn off your water heater whether it’s electric or gas. 

Why Shut Off a Water Heater

  • Maintenance or Repairs:  Make sure to turn off your water heater first if you will be undergoing maintenance. If you are doing some repairs on your water heater make sure to shut it off first before doing anything.
  • Vacations: Turning off your water heater while you are out on vacation will give you benefits. Conserving energy is one of them.
  • Emergencies: Turn off quickly your water heater if there’s an emergency like water leaking. 


Turning Off an Electric Water Heater

Step 1: Turn Off the Power

This is typically done at the circuit breaker box. Locate the correct circuit breaker and switch it to the ‘off’ position.

Step 2: Turn Off the Water Supply

Switch off the water supply. 

Turning Off a Gas Water Heater

Step 1: Turn Off the Gas Supply

The first place to look for a gas water heater temperature dial is on the bottom of the tank, typically in the front of the tank. Turn the dial off.

Step 2: Turn Off the Water Supply

Turn off the water supply by turning the valve in the direction that indicates off. 

Knowing How to Properly Turn Off Your Water Heater Plays a Big Part in Conserving Energy

Knowledge of how to turn off your water heater at home is important. It may sound very basic but that could save lives especially when unforeseen events happen.

We know that being a homeowner is about more than just four walls and a roof. Everyone deserves to live in a home where they have nothing to worry about. Regular water heater maintenance, including knowing how to properly turn it off, plays a big part in that.
Stay safe and remember to keep up with regular water heater maintenance!
If you are uncomfortable turning off your water heater Pipe Master Plumbing in Franklin is just a call away.

New Hot Water Heater Installation

Should your water heater repair be extensive or your water heater is aging and not performing as well as it ought, we can install a new water heater. Our team is experienced with a variety of makes and models, both standard tank, and tankless systems. Give us a call at (931) 215-1693 to find out what systems we recommend. We also recommend you rely on professionals to install your water heater. Getting a professional like those at Pipe Master Plumbing ensures the device is installed properly and safely. A poor installation could lead to costly repairs later on.

When you get a water heater installation in Franklin and Brentwood, TN, one of the most important considerations is size. In fact, undersized units can cause you to have frequent problems with the water not getting hot enough. If you’re using too small of a system for your household, it places a great deal of wear and tear on the system.

When we install a new water heater, we work closely with you to find the right system for your home. We make sure to install a water heater that’s the right size for your household by evaluating the size of your property and the typical amount of water you use. At the time you’re installing a new water heater, you may want to take advantage of our other services, including clearing clogs and repairing leaks from your main water line or sewer line. This ensures your whole system is working properly, including the new water heater.

20+ Years of Great Service

We've seen it all. 20+ years of seeing and repairing nearly every type of plumbing issue.

Get On The Schedule


Fully Licensed and Insured

So you don't have to worry about who's working on your house.

Get On The Schedule


A Name You Can Trust

We do the work right the first time or our labor is free.

Get On The Schedule



Enter your contact details here to help us serve you better & faster.

Call Pipe Master Plumbing Today

When you want a plumbing company in Franklin, Brentwood, Columbia, Spring Hill and Mt. Pleasant, TN you can trust, call us for help. We would be honored to serve you.

24-Hours Emergency Services

Uniformed Licensed Plumbers

No Travel Charges

Free Estimates

Let's Connect on Social Media!

Call Now Button931-215-1693 | Open 24/7