Pipe bursting is a new technique to replace damaged water pipes without digging up the entire street. This technique is also known as pipe jack and pipe jacking. You can ask your friendly neighborhood plumbers more about this innovative plumbing technology.
It works by inserting a new, larger pipe inside the old, damaged one. The water flow can be restored through this newly installed pipe. The process doesn’t require excavation, and it’s an inexpensive alternative to traditional methods of replacing old pipes.
Pipe bursting does not also use added chemicals that can affect water quality. Thanks to this technology and the use of environment-friendly high-density polyethylene (HDPE) pipes, it is considered a very sustainable pipe replacement method.
All About Pipe Bursting Technology
Pipe bursting technology involves pulling an expander head known as the “bullet” or “bursting head” through an old pipe. The bursting head can fit enough through the existing pipe and fractures it as it is pulled through. Then, the back of the head is connected to the new line.
Meanwhile, a pulling machine uses powder from a hydraulic system connected to pulling rods and then attached to the expander head. Then, the pulling machine will be lowered into the receiving pit, and the entire pipe bursting process will occur.
Benefits of Pipe Bursting
Several reasons residential and commercial business owners should consider pipe bursting technology. For one, it is more sanitary than traditional sewer repair methods.
Pipe bursting technology is also an environment-friendly way to deal with pipe replacements as it won’t cause a mess to anyone’s property, if not only minimal. That means this technology won’t hurt or damage your concrete and landscaping.
Other benefits of pipe bursting are the following:
- It can be used with internal pipe diameters and pull lengths of over 1000 ft.
- Pipe bursting technology can replace most pipe materials except HDPE pipe material
- It can also be used regardless of the existing pipe’s current condition
- It also lets you increase the pipe’s diameter for improved flow
How Much is Pipe Bursting?
It depends on several factors, such as the depth and length of the pipe and the amount of pipe damage. The location of the sewer lateral should also be considered, as nearby structures within the property, such as sheds, garages, and other underground utilities nearby.
You should also consider the number of branch connections, sinkholes, the slope of the pipe, and if a neighbor is connected to your pipeline. The materials that will be used for this project will also determine how much you are going to spend for the entire process.
Aside from the materials and the structures nearby, it would help if you also considered the necessary permits and surface restoration factors. But to give you an idea, pipe bursting could cost between $60 to $200 per foot. The entire procedure could cost up to $20,000, depending on the pipe’s overall situation.
Pipe bursting technology is an innovative solution for all types of pipes and plumbing needs. Contact a professional plumbing service in Spring Hill, TN, today to know more about this procedure.